|
Ben
Pearson BP-79 Exhaust Pipe Bender
Power and affordability
rolled into a hard working bender
It'll give you all the power you need at an affordable price |
Back
to Top
Next Offer |
If you're looking for a powerful bender that's got the
features you need to get the job done, take a long look
at the BP-79 from Ben Pearson.
- Main cylinder mount is solid welded internally,
plus welded end plate for added support
- Quick disconnect tooling
- Hands-free bending utilizes padded knee lever
control for fast accurate bends
- Quick-change dies
- 220V single phase, 60 cycle
|
- Lifetime Limited Warranty
- Bend depth to 180 degrees on a 5 inch radius
- Unique design eliminates possibility of radius
die locking behind back shoes
- 3 inch bending capacity
- Color-coded dies
- Rugged 4 HP motor
|
Ben Pearson MC-59 Exhaust Pipe Bender
The Industry Leader in Exhaust Service
The Ultimate in Pipe Bender Technology |
Back to Top
Next Offer |
Incorporating state-of-the-art technology, the MC-59 pipe bender
leads the industry in operator convenience features - 180 degree
bend on 5" radius, 3" bending capability and a rugged
electrical and hydraulic system that will perform over the long
haul. Plus, the MC-59 Pipe Bender offers two end-of-pipe systems
for quick and easy operation.The MC-59 from Ben Pearson is truly
the "TOP GUN" in the exhaust service repair industry.
- Lifetime Limited Warranty
- Bend depth to 180° on a 5" radius
- Quick-change dies
- Color-coded dies
- Spring-loaded die carriage
- Automatic depth-of-bend
- Automatic motor cut-off
- 220 volt single phase, 60 cycle
|
- Bending capability through 3"
- Unique die design eliminates possibility of radius die
locking behind back shoes
- Knee control of ram die
- Energy efficient dual stage hydraulic pump
- Heavy-duty 4 HP motor
|
180° Bend On A 5" Radius
Try this with another pipe bender and the results may be less
than spectacular. With the Ben Pearson pipe bender you'll
get a perfect 180° bend on a 5" radius die. What
you won`t get is a pipe that is crimped or collapsed. The
reason for this is very simple-Ben Pearson's unique die construction
eliminates the problem of the pipe locking on the die. This
extra feature saves you, the operator, time and money.
|
Longer Stroke Main Cylinder
We've added an extra 3" stroke to the main cylinder. The benefits are obvious-you get an extra 6" of space between the edge of the ram
die and the edges of the back shoes. You have more room to feed pipe through the machine, thus eliminating the need for cumbersome
and time consuming pusher blocks. Ben Pearson developed the longer stroke main cylinder for operator convenience.
|
The MC-59 Offers Two End-of-Pipe Systems
 To
make your job easier, faster and more efficient, the MC-59
offers two end-of-pipe systems as standard equipment. The
segment expander offers some unique features that make it
easier to operate than competitive models. Like the ability
to expand, flare or ball joint close to the end of the pipe.
Plus, the unique bull's eye gauge, with an accurate and complete
O.D. and I.D. setting chart, ensures accurate connections
and slip fits. The clamp-down swager system on the MC-59 gives
you the flexibility to swage, flare, ball joint, reduce and
flange. Plus, for more power and increased operator safety,
the clamp-down swager system operates on a separate cylinder. |
If you were under the impression that you had to
invest a lot of cash to get a solid bender loaded
with the features you need, we're about to prove you
wrong. Just check out the automatic features on Ben
Pearson's MB-97 -- automatic depth of bend, automatic
ram retraction, automatic motor cut-off, and that's
just the beginning list of features. The new MB-79
from Ben Pearson delivers it all - power, features,
and durability, but it's available at a very affordable
price. The MB-97 is the bender you've been looking
for. It's loaded with all the automatic operator convenience
features you need, without the price tag to match!
- Lifetime Limited Warranty
- Unique design eliminates possibility of
radius die locking behind back shoes
- Bending capacity through 3"
- Quick-change dies
- Knee control of ram die
- Energy efficient dual stage hydraulic pump
- Automatic motor cut-off
|
- Bend depth to 180° on a 5" radius
- Utilizes a double-ended, dual action cylinder
for both solid and segmented end finishing
- Color-coded dies
- Spring-loaded die carriage
- Automatic depth of bend
- Automatic retraction of ram die
- Heavy-duty 4 HP motor
- 220 volt single phase, 60 cycle
|
| Bending Dies |
| Radius Dies |
Back Shoes (2) |
| Pipe Diameter
1-1/2"
1-3/4"
2"
2"
2"
2-1/4"
2-1/4"
2-1/2" |
Bend Radius
3"
4"
3"
4"
5"
4"
5"
5" |
1-1/2"
1-3/4"
2" |
2-1/4"
2-1/2" |
| Half Shoes |
1-1/2"
1-3/4"
2" |
2-1/4"
2-1/2" |
| End-Finishing
Tools (Solid) |
| Collets (2 required) |
Swagers |
Solid Die Flare |
| 1-1/2"
1-3/4"
2"
2-1/4"
2-1/2" |
1-1/2"
1-3/4"
2"
2-1/4"
2-1/2" |
45° flare
90° flare |
| End-Finishing Tools
(Segmented) |
| Expanders |
1-1/2" to 1-5/8"
1-3/4" to 2"
1-1/8" to 2-1/2" |
Back to Top
| Bending
Dies |
| Radius Dies |
Back Shoes (2) |
| Pipe Diameter
1-1/2"
1-3/4"
2"
2"
2"
2-1/4"
2-1/4"
2-1/2"
2-1/2" |
Bend Radius
3"
4"
3"
4"
5"
4"
5"
4"
5" |
1-1/2"
1-3/4"
1-7/8" |
2"
2-1/4"
2-1/2" |
| Half Shoes |
1-1/2"
1-3/4"
1-7/8" |
2"
2-1/4"
2-1/2" |
| Three Quarter Shoes
(1) |
| 2" |
2-1/4" |
| End-Finishing
Tools (Solid) |
| Collets
(2 required) |
Swagers
|
Solid
Die Flare |
1-1/2"
1-3/4"
1-7/8"
|
2"
2-1/4"
2-1/2" |
1-1/2"
1-3/4"
1-7/8"
2"
2-1/4"
2-1/2" |
45° flare
90° flare |
| Female
Ball Joint |
Super
Flange |
1-3/4" and 2"
2-1/4" and 2-1/2" |
1-1/2"
and 2" |
| End-Finishing
Tools (Segmented) |
| Expanders |
Buick
Ball Tools |
1-1/2" to 1-5/8"
2-1/8" to 2-1/2"
1-3/4" to 2-1/2" |
2"
2-1/2"
2-1/4" |
Back to Top
| Bending Dies |
| Radius Dies |
Back Shoes (2) |
| Pipe Diameter
1-1/2"
1-1/2"
1-3/4"
1-3/4"
1-7/8"
1-7/8"
1-7/8"
2"
2"
2"
2-1/4"
2-1/4"
2-1/4"
2-1/2"
2-1/2" |
Bend Radius
3"
4"
3"
4"
3"
4"
5"
3"
4"
5"
3"
4"
5"
4"
5" |
1-1/2"
1-3/4"
1-7/8" |
2"
2-1/4"
2-1/2" |
| Half Shoes |
1-1/2"
1-3/4"
1-7/8" |
2"
2-1/4"
2-1/2"
|
| Three
Quarter Shoes (1) |
| 2" |
2-1/4" |
| End-Finishing
Tools (Solid) |
| Collets
(2 required) |
Swagers
|
Solid
Die Flare |
|
1-1/2"
1-3/4"
1-7/8"
|
2"
2-1/4"
2-1/2" |
1-1/2"
1-3/4"
1-7/8"
2"
2-1/4"
2-1/2" |
45° flare
90° flare |
| Female
Ball Joint |
Super
Flange |
1-3/4" and 2"
2-1/4" and 2-1/2" |
1-1/2"
and 2" |
| End-Finishing
Tools (Segmented) |
| Expanders |
Buick
Ball Tools |
1-1/2" to 1-5/8"
2-1/8" to 2-1/2"
1-3/4" to 2-1/2" |
2"
2-1/2"
2-1/4" |
| Flares 45 Degree |
Accessories |
1-3/4" and 2-1/4"
1-7/8" and 2-3/8"
2" and 2-1/2" |
Deluxe
program cards
Rotational Dial |
Back to Top
|
|
|
